U-Convert-It v3.00
The Units of Measure Conversion Utility!
Copyright  1995-1997 CuzWare Systems
All Rights Reserved
===================================================================
Read Me...
General Information about U-Convert-It
===================================================================
Table of Contents

1.	System Requirements
2.	Installation
3.	List Of Files
4.	Documentation & Help
5.	Upgrade Instructions
6.	Shareware Information
7.	Ordering / Registration Information & Why Register?
8.	How To Obtain Product Support
9.	Message from the Author
10.	Contacting CuzWare Systems
11.	Revision History Notes

-------------------------------------------------------------------
1.	System Requirements
-------------------------------------------------------------------
What You Need To Run U-Convert-It

  > Windows 3.1 or later, Windows for Workgroups or Windows 95
  > 8 MB of RAM (16MB recommended)
  > 80486 or higher microprocessor
  > Mouse or other pointing device (recommended)
  > Color monitor - VGA or higher-resolution screen

-------------------------------------------------------------------
2.	Installation
-------------------------------------------------------------------
Installing U-Convert-It From Floppy Disks

If you received this version of U-Convert-It on floppy disks,
insert the disk marked "Disk 1 of 2" into a floppy drive.
1. Launch Windows if it's not already running.
2. >> For Windows 95: choose Run from the Start menu, type a:setup
   at the command line and press ENTER.
   >> For Windows 3.x: from the Windows Program Manager choose Run
   from the File menu, type a:setup and press ENTER.
3. Follow the instructions on the screen to enter the directory in
   which to install U-Convert-It (C:\UCONVERT is the default).
4. The Setup program will display a number of prompts. Follow the
   directions on the screen to complete the Setup. If you're not
   sure which setting to choose when prompted, we suggest selecting
   the default choices.
5. A dialog box will appear informing you when installation is
   complete.

Installing U-Convert-It From An Archive (ZIP file)

If you received this version of U-Convert-It as a ZIP file, extract
all of the files from the archive to an empty directory on your
hard drive.
1. Launch Windows if it's not already running.
2. >> For Windows 95: choose Run from the Start menu. Click the
   Browse button and navigate to the directory where you placed the
   extracted Setup files. Click on SETUP.EXE, then click the Open
   button. From the Run dialog box choose OK to begin the Setup
   program.
   >> For Windows 3.x: from the Windows Program Manager choose Run
   from the File menu. Click the Browse button and navigate to the
   directory where you placed the extracted Setup files. Click on
   SETUP.EXE, then click the OK button. From the Run dialog box
   choose OK to begin the Setup program.
3. Follow instructions shown above in steps 3, 4 & 5 (From Floppy
   Disks) to complete the installation.

-------------------------------------------------------------------
3.	List Of Files
-------------------------------------------------------------------
Files You Need

The U-Convert-It v3.00 shareware package consists of the following
files:
	
* UCONVERT.EXE    U-Convert-It program executable.
  UCONVERT.HLP    U-Convert-It help file in the Windows help file
                  format.
* THREED16.OCX    3D custom control.
* COMDLG16.OCX    Common dialog box custom control.
  README.TXT      Introductory and General information.
  ORDER.TXT       ASCII form for ordering / registering.
  LICENSE.TXT     License agreement / warranty disclaimer.
  WHATSNEW.TXT    List of additions / changes for this version.
  FILE_ID.DIZ     Description file for bulletin boards.

Various other necessary runtime files and SETUP program files are
also included in the package but are not listed above.

*  Denotes files necessary for program function.

Some files are distributed with an underscore character at the end
of the filename. The underscore is replaced with the appropriate
character by the SETUP program.
As an example: UCONVERT.EX_ will become UCONVERT.EXE.

U-Convert-It is distributed as Shareware.  This means that users
are encouraged, subject to restrictions described in the License
Agreement, to share copies of this program with friends, associates
and bulletin boards. You may freely copy and distribute this file
as mentioned above. Alternately, if you downloaded this copy of U-
Convert-It from an online service such as CompuServe or a bulletin
board, that same file may also be freely distributed as stated
above.

If you did not receive all the listed files, have trouble
installing U-Convert-It, or any other questions... please contact
CuzWare Systems via any method listed in the "Contacting CuzWare
Systems" section of this file.

-------------------------------------------------------------------
4.	Documentation & Help
-------------------------------------------------------------------
Getting Online Help

For full documentation, including context sensitive help, press the
F1 key at any time while running U-Convert-It.

-------------------------------------------------------------------
5.	Upgrade Instructions
-------------------------------------------------------------------
Upgrade Policy

All future upgrades are FREE to registered users of U-Convert-It
providing that you download the necessary file(s) from an online
service. There are no time or quantity limits on obtaining free
upgrades once you've registered U-Convert-It. Registered users may
purchase upgrade disk(s) if desired (see the Help file for
details).

How To Upgrade

Follow the installation instructions above. You can install this
version of U-Convert-It to the same location as a previously
installed copy of U-Convert-It. If you're already a registered
user, you will not need to re-register the upgrade. U-Convert-It
does it for you automatically!

-------------------------------------------------------------------
6.	Shareware Information
-------------------------------------------------------------------
U-Convert-It is a "shareware program" and is provided at no charge
to the user for evaluation. Feel free to share it with your
friends, but please do not give it away altered or as part of
another system. The essence of "user-supported" software is to
provide personal computer users with quality software without high
prices, and yet to provide incentive for programmers to continue to
develop new products. If you find this program useful and find that
you are using U-Convert-It and continue to use U-Convert-It after a
30 day trial period, you must make a registration payment of $15
(single user) to CuzWare Systems as described in the
Copyright/License/Warranty Agreement file: (LICENSE.TXT). The $15
registration fee will license one copy for use on any one computer
at any one time. You must treat this software just like a book. An
example is that this software may be used by any number of people
and may be freely moved from one computer location to another, so
long as there is no possibility of it being used at one location
while it's being used at another. Just as a book cannot be read by
two different persons at the same time. Commercial users of U-
Convert-It must register and pay for their copies of U-Convert-It
within 30 days of first use or their license is withdrawn. Site-
License arrangements may be made by contacting Fred Block of
CuzWare Systems.

-------------------------------------------------------------------
7.	Ordering / Registration Information & Why Register?
-------------------------------------------------------------------
Mail Orders:
For mail ordering information see the ORDER.TXT file. You may also
go to the U-Convert-It help file and open the 'Order Form' topic.

Online Registration:
Registering can be done online with the CompuServe Registration
Database! To have the registration fee added to your CompuServe
bill... 'GO SWREG' and follow the menus. U-Convert-It's
registration ID is 9523. See the Help file for more information.

What You Get With Your Registration:
    The latest version of the software on disk(s)
    Unlimited technical support
    FREE unlimited future upgrades
    E-mail notification of future upgrades
    Elimination of all shareware messages and nag screens
    New product notification
    A good feeling knowing you are supporting the shareware
     concept and keeping this product under development.

-------------------------------------------------------------------
8.	How To Obtain Product Support
-------------------------------------------------------------------
Product Support

If you are a registered user of U-Convert-It, unlimited technical
support is available at no charge. All users can obtain technical
support either by postal mail and/or e-mail (see "Getting In Touch"
below). We will fully support unregistered users during their
evaluation period, but we will give priority to registered users,
as necessary.

-------------------------------------------------------------------
9.	Message from the Author
-------------------------------------------------------------------
A Message From The Author...

Please write if you have any suggestions, comments and/or wishes
for future releases of U-Convert-It. Also let us know if you have
any questions or bugs <g> to report. This information is both
encouraged and greatly appreciated. Thank You!

-------------------------------------------------------------------
10.	Contacting CuzWare Systems
-------------------------------------------------------------------
Getting In Touch

Postal Mail: CuzWare Systems
             P.O. Box  1533
             McAfee, NJ 07428-1533
             USA

CompuServe: 73410,3726

America Online: CuzWare

Internet: 73410.3726@compuserve.com -or- cuzware@aol.com

U-Convert-It Web Site URL: http://members.aol.com/cuzware/uconvert

-------------------------------------------------------------------
11.	Revision History Notes
-------------------------------------------------------------------
The History of U-Convert-It Revisions

Ver.  Date  Description
----  ----- ------------
1.00  08/95 Initial Release.

1.01  08/95 Fixed bug. User settings did not save if program was
            exited using the control box.

1.02  09/95 Fixed sq. meters to acres conversion. This conversion
            always resulted in a "0" result. (Thanks to Manny!)

1.10  10/95 Added "From/To" swapping capability.

1.20  11/95 Added Angle and Velocity conversion types. Updated the
            'save settings' features to save 'all' of the users
            last settings for 'all' of the conversion types. Added
            instant access to the Microsoft Windows calculator.
            Both the built-in and Windows calculators are available
            from the Tools menu or hot-key combinations.

2.00  01/96 Added Force and Density conversion types. Added
            "Shrink" feature. Redesigned the "Swap" button. Now
            unit type abbreviations are displayed above the "From &
            To" list boxes. Fixed liters to cu. feet conversion.
            (Thanks to Gary!)

2.01  01/96 Added information about online registration with
            CompuServe. Other maintenance work... Text & Help file
            updates.

2.10  03/96 Added Time and Torque conversion types. Added the
            'Results Window'. Users can save conversions to
            file(s). The Results Window supports text editing,
            filing and printing. Added 'Convert' command button.
            Updated the 'About' dialog box. Enhanced the online
            context sensitive help / file.

2.20  06/96 Added Energy and Pressure conversion types. Added color
            to icons in the Results Window. Fix spelling error.
            (Thanks Cuz!)

2.21  07/96 Fixed title bar display for "Pressure".

3.00  01/97 Added: Flow, Power, four (4) user-definable conversion
            types, hundreds of unit types to existing conversion
            types, pop-up menus, conversion type selection dialog
            and preference dialog box. Enhanced accuracy
            formatting and user color selections. Also...
            un-abbreviated unit type descriptions, updated "Shrink
            Window" interface, more Clipboard support, alphabetical
            conversion type and unit type lists.

*** End of File ***